statek corporation 512 n. main st., orange, ca 92868 714-639-7810 fax: 714-997-1256 www.statek.com s y s t e m c e r t i f i c a t i o n i s o 9 0 0 1 10111 - rev e description the lxoa t consists of a ttl and cmos-compatible hybrid circuit and a miniature quartz crystal packaged in a hermetically-sealed metal dip . permanent, precision tuning and a hermetically sealed a t quartz crystal allows for very tight calibration tolerance and eliminates the need for a tuning capacitor , a major source of long-term frequency drift. fea t ures low aging cmos and ttl compatible double hermetically sealed package full military testing available 3 v o lt model also available optional t r i-state or output enable applica tions industrial, computer & communications general purpose clock oscillator military flight recorder airborne hybrid computers lxoa t oscilla tor 312 khz to 120 mhz low power crystal oscillator v dd v oh t r t f 0 v ol 9 0%* 10%* lx0-70.0mhz * of v dd p a ckage dimensions b c pin no. 1 pin no. 14 pin no.8 pin no.7 g f e h d a j i dim i nches mm a 0 . 810 max. 20 . 57 max. b 0 . 510 max. 12 . 95 max. c 0. 300 0.005 7 . 62 0.13 d 0 . 600 0.005 15 . 24 0.13 e 0 . 430 typ . 10 . 92 typ . f 0 . 240 max. 6 . 10 max. g 0 . 040 typ . 1 . 02 typ . h 0 . 150 min. 3 . 81 min. i 0 . 018 0.002 0 . 46 0.05 j 0.070 typ . 1 . 78 typ . * position of bumps for reference only + _ + _ + _ + _ + _ + _ output wa ve form http://
statek corporation 512 n. main st., orange, ca 92868 714-639-7810 fax: 714-997-1256 www.statek.com s y s t e m c e r t i f i c a t i o n i s o 9 0 0 1 10111 - rev e specifica tions specifications are typical at 25 o c unless otherwise noted. specifications are subject to change without notice. supply v o ltage (v dd ) 5v 10% (3.3v available) calibration 100 ppm (0.01%) t o lerance (at 5v) 1 1000 ppm (0.1%) 10000 ppm (1.0%) frequency 0 o c to + 5 0 o c from 5 to 30ppm stability 2 -10 o c to + 70 o c from 10 to 50ppm -40 o c to +85 o c from 20 t o 100ppm -55 o c t o + 125 o c from 30 to 100ppm supply current 4 ma to 60 ma (depending on freq.) output levels v ol v oh ttl 0.4v max. 2.4v min. cmos 0.5v max. 4.5v min. start-up t ime 5 ms max. rise/fall t ime 6 ns t y p., 10 ns max. duty cycle 40% min., 60% max. aging, first year 10 ppm max. shock, survival 3 1,000 g peak 1 ms, 1/2 sine v i bration survival 10 g rms 10-2000 hz operating t e mperature -10 o c to +70 o c (commercial) -40 o c to +85 o c (industrial) -55 o c to +125 o c (military) storage t e mperature -55 o c to +125 o c 1. t ighter tolerances available for calibration and stability . 2. does not include calibration tolerance 3. high shock version available note: all parameters are measured at ambient temperature with a 10m and 10pf load at 5v + _ + _ + _ + _ + _ + _ + _ + _ + _ + _ + _ + _ how to order lxoa t crysta l oscilla tors lxoa t s t 32 mhz , 100 / 100 / - / i absolute maximum ratings supply voltage v dd -0.3v to 7v storage t e mperature -55 o c to +125 o c enable vs. tri-sta te enable: when pin 1 is low (0), the oscillator stops oscillation. t ri-state: when pin 1 is low , the oscillator is running. however , the output buf fer amplifier stops functioning and output is in high impedance (z) state. enable tri-state current consumption when pin 1 is low low high output recovery delay when pin 1 changes from delayed immediate low (0) to high (1) pin connections 1. output enable, inh (t ri-state) or nc 7. ground 8. output 14. v dd p ackaging lxoa t - t ube pack (standard) frequency k = khz m = mhz ?s? if special or custom design. blank if std. calibration t o lerance @ 25 o c (in ppm) frequency stability over temp. range (in ppm) to t a l frequency tolerance (in ppm) operating t emp. range: c= - 1 0 o c to +70 o c i =- 4 0 o c to +85 o c m= - 5 5 o c to +125 o c s = customer specified e = enable t = tri-state n = neither temp. range: c=- 1 0 o c to +70 o c i =- 4 0 o c to +85 o c m = -55 o c to +125 o c s = customer specified total frequency toleran c e (in ppm) or 200 i
|